Radio buttons

Select a single item from a list.

Use it to group simple selections that shows all options. For more compact or complex selections, consider using Select.

Example

Loading...

Properties

note

This component uses a Data Source.

General

Attribute	Type	Description	Category
Model Id	String	This is a unique id for the component.	Every field on a form model needs a unique ID, which is automatically generated but can be changed if needed (e.g. to reference in expressions or for debugging purposes). If the field type supports rendering a label, and most types do, it can be configured here. This label is a displayed on the form to the end user and typically indicates what value is expected in the field. The documentation property holds free-form text that can be used to give more details about this , like its purpose, usage in other models, etc.
Label	Text	The label attribute adds a label to the component.
Label position	Selection: Left Top	The position of the label, you can choose between left or top.
Label tooltip	Text	When it is defined, a question mark icon will appear in the component label. When the user hovers over it it will show this text in a tooltip.
Documentation	Multiline Text	A free-form text to explain the use cases for this form field.
Value	Text	The binding for the form field. Use an appropriate expression to bind the component to its value and specify where the value is written/read. For example, use '{{myVariableName}}' to store the value of the field in a variable named 'myVariableName'. Use prefixes to define the scope of the value, for example, 'root.' for referencing the root case/process to store the value in. Please refer to the section 'Frontend expressions' in the Flowable guide for more information.	The purpose of a form is to either display some value or to have users provide values for the various fields of a form. In both situations, this value needs to be bound to an identifier using the {{myValue}} notation, and the value provided by the user will be stored in a variable with that identifier. If there already was a value bound to the identifier before, for example because another form had a field bound to the same identifier, it will be displayed.
Default value	Text	If the value is not set, the default value will be used.
Tab Index	Integer	Determine their relative ordering for sequential focus navigation. Tab index will be ignored if the component is inside a subform.

Datasource

Attribute	Type	Description	Category
Data source	Selection: Static REST Master Data Object	Options to select different types of Data source.	The datasource of the configures where the data options available to the user originate from. The source can be statically defined or dynamically populated from a third party service.
Items	List	When using a 'static' datasource, the items need to be defined. If no values are shown, make sure you have configured the 'columns' property, as the items are defined by giving values for the different columns.
Master Data Key	Text	Key representing the Master Data Type. e.g., 'md-country'.
Include Translations	Boolean	Flag indicating whether master data instance translations should be included in the fetched data.
Query URL	Text	URL to request the items with optional variables. $searchText: Text the user typed if the component allows search. $start: First item index (for pagination). $pageSize: Number of items per page. eg. /rest/users?start={{$start}}&size={{$pageSize}}
Lookup URL	Text	The REST endpoint URL used to retrieve the full item by ID. For example, rest/get?id={{$id}}&type={{someValue}} The URL can contain expressions evaluated against the current work object. The selected item ID is available as $id If the lookupURL does not contain {{$id}}, this will be automatically added at the end. The URL should not be encoded as it will be encoded automatically.
Path	Text	When using a REST data source, this is the location in the response data to get the row collection.
Data object model	dataobjectselectsearch	Defines which type of data object data is returned when using the select and which operation is used.
Query Parameters	List	The query parameters that should be added to the Query URL. $searchText: Text the user typed if the component allows search. $start: First item index (for pagination). $pageSize: Number of items per page. eg. /rest/users?start={{$start}}&size={{$pageSize}}	Query parameters will be added to the REST requests that are executed when data is fetched to display in the .
Format	Text	An expression used to generate the label for each item. For example, Mr. {{$item.name}} {{$item.surname}} The expression is evaluated against the current work object. The selected item is available as $item.	Advanced configuration options of the datasource. Please check the tooltips on each property for more information.
Storage	Selection: ID Full value	Specifies how the data retrieved by the REST endpoint should be stored in the variable. Choose 'ID' if only the ID of the selected entry should be saved in the variable, choose 'Full value' if the whole object should be saved and thus making it possible to display other values of the selected element within the form as well. Pay attention as storing the full value could lead int bloating the variables with unnecessary information depending on the amount of data retrieved by the REST endpoint.
Map to	Text	The attribute of an item to map to. For a Static data source 'value' is commonly used as the map to attribute and for a REST data source 'id' is commonly used as the map to attribute.
Map to	Selection: id key	The attribute of an item to map to. For a Static data source 'value' is commonly used as the map to attribute and for a REST data source 'id' is commonly used as the map to attribute.
Track by	Text	The attribute to uniquely reference an item for tracking may improve form frontend performance. For 'REST' datasource is usually 'id', for Static data is usually 'value'.

Validation

Attribute	Type	Description	Category
Required	Boolean	The required flag specifies if entering a value for the component is mandatory.	Providing proper data in form fields is important, especially when in process, case, decision or any other models the values provided in the form fields are used in subsequent steps. To make sure that the data is correct, validation is crucial. For this reason, a form can only be submitted when all fields are valid and thus all validation properties configured on the left apply. Check the tooltips on the properties for more information.
Validation Panel Display	Selection: Show Only message Hide	Display at validation panel and validation tooltip.
Custom validations	List	List of additional validations to apply.	The can have custom validation rules beyond the standard set of validations. Such a rule is written as a frontend expression in the form of {{myExpression}}. If this expression evaluates to false, the submission of the form won't be possible.

Rendering

Attribute	Type	Description	Category
Description	Text	The description attribute adds a description to the component.	Some field types have an extra line of text displayed to give the user more details about the field.
Ignored	Boolean	If true the component will be hidden and the value will not be part of any payload.	Fields can also be shown or hidden based on the visible condition. This can be a frontend expression in the form of {{myExpression}} which can reference other form field values by their IDs. Fields can also be enabled or disabled, and similarly this can be made dynamic based on a frontend expression. Some field types can be ignored (the property is shown here if that's the case), which means that its value won't be taken into account.
Visible	Boolean	Boolean value or expression specifies whether the component is visible or hidden. This expression might include another value in the same form, for instance use a checkbox bound to {{showAdditionalFields}} and use the very same expression as the visible attribute to show or hide the component according the checked state of the checkbox. If you want to only show the component, if the form is not used as the init-form, you can use the expression '{{root.id}}' which evaluates to true only, if there is a current case id which is not the case in an initialization form.
Enabled	Boolean	Boolean value or expression specifies whether component is enabled or disabled.
Style class	Text	Stylesheet class name. Add any style classes to be applied to the component for the desired styling and rendering.	The can get customized CSS classes to customize the default styling. Note that the CSS files needed for the customizations must be available on the runtime system.

Invocation

Advanced

Events

Attribute	Type	Description	Category
Events	List		The emits low-level events on which can be reacted with a frontend expression to implement various use cases that are not possible with regular modeling. If the expression produces a value, it can be stored in a new variable using the Result variable property.

Implementation

Attribute	Type	Description	Category
Orientation	Selection: Horizontal Vertical	Specifies if the alignment is horizontal or vertical	Advanced configuration properties for the .
Text option	Text	If it is not empty adds an ending option named with that string and with a text writable field.

List Attribute Details

Items

Attribute	Type	Description
Text	Text	Label for the item
Value	Text	Value for the item

Query Parameters

Attribute	Type	Description
Name	Text	The name of the query parameter
Value	Text	The value of the query parameter. The value will be automatically URL-encoded.
Default Value	Text	The default value for the query parameter (in case the value didn't return anything). The value will be automatically URL-encoded.

Custom validations

Attribute	Type	Description
Expression	Text	Validation passes when this expression is true.
Error message	Text	Message to display when the validation fails.

Events

Attribute	Type	Description
Event label	Text	This is a unique id for the component.
Event type	Selection: On value change	The type of event emitted by the form field.
Expression	Text	Validation passes when this expression is true.
Result variable	Text	Capture the result of the expression in a result variable.